Translator Disclaimer
14 April 2000 Beam-shaping element for compact fiber injection systems
Author Affiliations +
Proceedings Volume 3929, Solid State Lasers IX; (2000)
Event: Symposium on High-Power Lasers and Applications, 2000, San Jose, CA, United States
Injection of high power, multi-mode laser profiles into a fiber optic delivery system requires controlling a number of injection parameters to maximize throughput and minimize concerns for optical damage both at the entrance and exit faces of the fiber optic. A simple method for simultaneously achieving a compact fiber injection geometry and control of these injection parameters, independent of the input source characteristics, is provided by a refractive lenslet array and simple injection lens configuration. Design criteria together with analytical and experimental results for the refractive lenslet array and short focal length injection lens are presented. This arrangement provides a uniform spatial intensity distribution at the fiber injection plane to a large degree independent of the source mode structure, spatial profile, divergence, size, and/or alignment to the injection system. This technique has application to a number of laser systems where uniform illumination of a target or remote delivery of high peak power is desired.
© (2000) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Louis S. Weichman, Fred M. Dickey, and Richard N. Shagam "Beam-shaping element for compact fiber injection systems", Proc. SPIE 3929, Solid State Lasers IX, (14 April 2000);


Sharp focusing by means of binary relief at the end...
Proceedings of SPIE (April 04 2014)
Fiber optical beam shaping using polymeric structures
Proceedings of SPIE (June 02 2014)
Fiber optic interferornetric Sensors using multimode fibers
Proceedings of SPIE (December 01 1991)
A novel in fiber optical switch based on two core...
Proceedings of SPIE (January 08 2008)
Diffractive Optics And Its Applications In IR Systems
Proceedings of SPIE (September 20 1987)

Back to Top