Paper
2 May 2000 Comparison of vanadium-dioxide films produced via sol-gel and sputtering techniques
Author Affiliations +
Abstract
The purpose of this work is to compare thin films of vanadium dioxide (VO2) produced via a sol-gel process and a reactive sputtering technique. The sol-gel process used was based on vanadium oxide triisopropoxide precursor. This was converted to soli n dried ethanol by adding water, and the substrates were then dip coated with a controlled draw method in an inert atmosphere. After drying this was followed by a final reduction stage in a low oxygen partial pressure atmosphere. The reactive sputtering technique used carefully controlled deposition rates from a vanadium metal target in argon/oxygen atmosphere to ensure correct stoichiometry. The films were deposited on silicon substrates and were tested optically and electrically above the below the transition temperature. Results of transmission and reflectivity in the IR region of the spectrum, and electrical conductivity are presented. The results show that the sol-gel technique provides a viable alternative method to sputtering for the production of thin films of vanadium dioxide.
© (2000) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Roy E. Walker, John A. Coath, and Mark A. Richardson "Comparison of vanadium-dioxide films produced via sol-gel and sputtering techniques", Proc. SPIE 3943, Sol-Gel Optics V, (2 May 2000); https://doi.org/10.1117/12.384349
Lens.org Logo
CITATIONS
Cited by 3 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Sol-gels

Silicon films

Sputter deposition

Vanadium

Silicon

Bioalcohols

Reflectivity

Back to Top