Translator Disclaimer
21 April 2000 InP-based monolithic integration of 1.55-μm MQW laser diode and HBT driver circuit
Author Affiliations +
Proceedings Volume 3949, WDM and Photonic Switching Devices for Network Applications; (2000)
Event: Symposium on Integrated Optoelectronics, 2000, San Jose, CA, United States
An improved fabrication process and related experiment results of an InP-based monolithic integrated transmitter OEIC with a 1.55 micrometers MQW laser diode (LD) and an InP/InGaAs heterojunction bipolar transistors (HBT) driver circuit are presented. The epitaxial structure of the laser and driver circuits were continuously grown on semi- insulating Fe-doped InP substrate by a metal-organic chemical vapor deposition system using a vertically integration. HCL, H3PO4/H2O2 and HBr/HNO3 solution system were involved as selective or nonelective wet chemical etching respectively for the epitaxies of InP, InGaAs and InGaPAs. Both a nearly-standard contact photolithography depending on a two-step exposure technique and an electrical connection related to smoothly wet chemical etching profile of InP and InGaP in the crystal direction of (01-1) were developed in the process. The laser diode with a 3-um-wide ridge waveguide forming by a double- groove process self-aligned to the metal contact of P-type region showed an average threshold current as low as about 10mA. The HBT with a 120-nm-thick base layer performed a DC current gain of about 60-70 and an emitter-collector breakdown voltage of up to 4-5V. A clear eye diagram of the monolithic transmitter under a pulsed operation with 622Mbit/s bitrate nonreturn-to-zero pseudorandom code was obtained.
© (2000) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Xian-Jie Li, Fang-Hai Zhao, Qing-Ming Zeng, Yi Dong, Xu-hui Li, Shuren Yang, Ke-Li Cai, Benzhong Wang, Jin-Ping Ao, Chun-Guang Liang, and Shiyong Liu "InP-based monolithic integration of 1.55-μm MQW laser diode and HBT driver circuit", Proc. SPIE 3949, WDM and Photonic Switching Devices for Network Applications, (21 April 2000);


200mm full CMOS compatible hybrid III V Si laser process...
Proceedings of SPIE (January 01 1900)
Welding of an intermetallic Fe Al phase based alloy with...
Proceedings of SPIE (October 06 2003)
Joining of an Ni Al alloy by means of laser...
Proceedings of SPIE (October 06 2003)
Production Applications Of Laser Microchemistry
Proceedings of SPIE (September 01 1987)

Back to Top