Translator Disclaimer
Paper
27 April 2000 Cross-talk analysis for optical backplane using two-dimensional beam array from VCSEL and microlens array
Author Affiliations +
Proceedings Volume 3952, Optoelectronic Interconnects VII; Photonics Packaging and Integration II; (2000) https://doi.org/10.1117/12.384409
Event: Symposium on Integrated Optoelectronics, 2000, San Jose, CA, United States
Abstract
The design and experimental characterization of the substrate-mode guided wave optical backplane using 0.5mm, 0.75mm and 1mm pitch 2D optical beam array are described. The system sues arrays of multiplexed holograms to implement board to board interconnects and employs 250micrometers pitch 2D vertical-cavity surface-emitting lasers and microlens array as transmitter to provide 0.5mm to 1mm pitch 2D beam array, operating at 850nm. By comparing the optical beam properties at the detector plane including the spot size and power uniformity of optical beam array, as well as signal to noise ratio, the acceptable design parameters are justified. Furthermore, the improvement of throughput that can be achieved by 1D and 2D crosstalk analysis within the same design concept is presented. The results of crosstalk analysis obtained here are used for application to the standard five-board holographic optical backplane system.
© (2000) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Gicherl Kim and Ray T. Chen "Cross-talk analysis for optical backplane using two-dimensional beam array from VCSEL and microlens array", Proc. SPIE 3952, Optoelectronic Interconnects VII; Photonics Packaging and Integration II, (27 April 2000); https://doi.org/10.1117/12.384409
PROCEEDINGS
10 PAGES


SHARE
Advertisement
Advertisement
Back to Top