Long-period gratings as flow sensors for liquid-composite molding

Sylvia R. M. Kueh; Richard S. Parnas; Joy P. Dunkers; Suresh G. Advani; A. Paige Clifton Furrow; Mark E. Jones; Timothy A. Bailey

doi:10.1117/12.385495

13 May 2000 Long-period gratings as flow sensors for liquid-composite molding

Sylvia R. M. Kueh, Richard S. Parnas, Joy P. Dunkers, Suresh G. Advani, A. Paige Clifton Furrow, Mark E. Jones, Timothy A. Bailey

Author Affiliations +

Proceedings Volume 3993, Nondestructive Evaluation of Aging Materials and Composites IV; (2000) https://doi.org/10.1117/12.385495
Event: SPIE's 5th Annual International Symposium on Nondestructive Evaluation and Health Monitoring of Aging Infrastructure, 2000, Newport Beach, CA, United States

Abstract

One of the most important issues in liquid composite molding (LCM) is the complete saturation of the preform by the resin to eliminate voids or dry spots in the structure which could later adversely affect the structural integrity of the part. While there have been efforts in developing reliable mold filling simulations for LCM, very few successful flow sensing systems exist for detecting actual resin arrival during mold filling. In this study, the feasibility of using optical fibers with long period gratings (LPG) as sensors for monitoring flow in the LCM process was investigated. An advantage of using LPGs is that they are more robust and less susceptible to background noise than simple bare fibers. Furthermore, the location of resin arrival can be easily identified as the signals from each LPG uniquely correspond to predetermined wavelengths along the source spectrum. The LPGs are sensitive to changes in the refractive index and register a strong signal change when covered with resin. In this study, the LPG sensors were placed in the middle of a preform stack inside a mold and the sensor response after the mold was properly closed, and when the resin covered a particular LPG was monitored. An assortment of preforms, which included random mats and unidirectional fabrics, with a series of fiber volume fractions were used to determine their effects on the sensor response.

Citation Download Citation

Sylvia R. M. Kueh, Richard S. Parnas, Joy P. Dunkers, Suresh G. Advani, A. Paige Clifton Furrow, Mark E. Jones, and Timothy A. Bailey "Long-period gratings as flow sensors for liquid-composite molding", Proc. SPIE 3993, Nondestructive Evaluation of Aging Materials and Composites IV, (13 May 2000); https://doi.org/10.1117/12.385495

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available