EUVL printing results of a low-thermal expansion material (LTEM) mask

William M. Tong; John S. Taylor; Scott Daniel Hector; Melissa K. Shell; Guojing Zhang; Patrick A. Kearney; Christopher C. Walton; Cindy C. Larson; James R. Wasson; Pawitter J. S. Mangat; Donna J. O'Connell; Daniel R. Folk

doi:10.1117/12.390038

21 July 2000 EUVL printing results of a low-thermal expansion material (LTEM) mask

William M. Tong, John S. Taylor, Scott Daniel Hector, Melissa K. Shell, Guojing Zhang, Patrick A. Kearney, Christopher C. Walton, Cindy C. Larson, James R. Wasson, Pawitter J. S. Mangat, Donna J. O'Connell, Daniel R. Folk

Author Affiliations +

Proceedings Volume 3997, Emerging Lithographic Technologies IV; (2000) https://doi.org/10.1117/12.390038
Event: Microlithography 2000, 2000, Santa Clara, CA, United States

Abstract

Minimizing image placement errors due to thermal distortion of the mask is a key requirement for qualifying EUV Lithography as a Next Generation Lithography (NGL). Employing Low Thermal Expansion Materials (LTEMs) for mask substrates is a viable solution for controlling mask thermal distortion and is being investigated by a wide array of researchers, tool makers, photomask suppliers, and material manufacturers. Finite element modeling has shown that an EUVL mask with a Coefficient of Thermal Expansion (CTE) of less than 20 ppb/K will meet overlay error budgets for <EQ 70 nm lithography at a throughput of 80 wafers per hour. In this paper, we describe the functional differences between today's photomask and EUVL masks; some of these differences are EUVL specific, while others are natural consequences of the shrinking critical dimension. We demonstrate that a feasible manufacturing pathway exists for Low Thermal Expansion Material (LTEM) EUVL masks by fabricating a wafer-shaped LTEM mask substrate using the same manufacturing steps as for fabricating Si wafers. The LTEM substrate was then coated with Mo/Si multilayers, patterned, and printed using the 10X Microstepper. The images were essentially indistinguishable from those images acquired from masks fabricated from high quality silicon wafers as substrates. Our observations lend further evidence that an LTEM can be used as the EUVL mask substrate material.

Citation Download Citation

William M. Tong, John S. Taylor, Scott Daniel Hector, Melissa K. Shell, Guojing Zhang, Patrick A. Kearney, Christopher C. Walton, Cindy C. Larson, James R. Wasson, Pawitter J. S. Mangat, Donna J. O'Connell, and Daniel R. Folk "EUVL printing results of a low-thermal expansion material (LTEM) mask", Proc. SPIE 3997, Emerging Lithographic Technologies IV, (21 July 2000); https://doi.org/10.1117/12.390038

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available