Translator Disclaimer
Paper
16 August 2000 Fiber positioning of LAMOST
Author Affiliations +
Abstract
LAMOST is a 4m class wide field of view telescope special design for multi-object spectroscopic observation. For the observing mode of low spectral resolution, 4000 fibers are employed. 4000 fibers is a challenge to the positioning of multi-object spectroscopy nowadays. We are going to use a method that each fiber is controlled by independent positioner, like MX. But the working area of every fiber is limited in quite small a region comparing with whole focal pane to reduce the size of the position device so that 4000 positioners could be homed inside focal plate. The first problem of the method we have considered is the usable rate of fibers. Because 4000 fibers employed by LAMOST and a couple of times of targets in a field of view of LAMOST, a reasonable usable rate of fiber is expected. But there are still a few problems we have to solve before the method could be used. Paralleled control of 4000 positioners, the electronic and mechanical interference between positioners may be a trouble. And the stability of bases plate should be considered. Some models of positioners has been proposed and made for test in past two years. They have been examined in laboratory and in observatory.
© (2000) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Gang Wang "Fiber positioning of LAMOST", Proc. SPIE 4008, Optical and IR Telescope Instrumentation and Detectors, (16 August 2000); https://doi.org/10.1117/12.395412
PROCEEDINGS
8 PAGES


SHARE
Advertisement
Advertisement
Back to Top