Paper
17 July 2000 Temperature dependence of spatial noise in InSb focal plane arrays
Lior Shkedy, Ornit Amir, Zipora Calahora, Joelle Oiknine-Schlesinger, Igor Szafranek
Author Affiliations +
Abstract
Performance of InSb focal plane array (FPA) detectors depends to a great extent on both the absolute temperature and the temperature fluctuations of the detector. The residual spatial noise, which can be achieved and maintained after a two-point non-uniformity correction (NUC), increases with the FPA temperature changes relative to that at which the NUC procedure was performed. A model is described, which allows prediction of the InSb FPA residual non-uniformity (RNU) as a function of the FPA temperature fluctuations for a given set of the FPA, cold shield and background radiation parameters. The calculated values are confirmed by experimental data. It is demonstrated that, as predicted, RNU degradation is primarily caused by signal offset changes corresponding to the InSb dark current variations, which are induced by the FPA temperature instability. The influence of the FPA temperature variation on NUC can be effectively compensated by a one-point offset correction. When this procedure is impractical, the dark current compensation method is proposed, which allows for a real-time, continuous compensation of the FPA temperature variations, resulting in a low residual non-uniformity.
© (2000) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Lior Shkedy, Ornit Amir, Zipora Calahora, Joelle Oiknine-Schlesinger, and Igor Szafranek "Temperature dependence of spatial noise in InSb focal plane arrays", Proc. SPIE 4028, Infrared Detectors and Focal Plane Arrays VI, (17 July 2000); https://doi.org/10.1117/12.391762
Lens.org Logo
CITATIONS
Cited by 14 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Staring arrays

Nonuniformity corrections

Sensors

Temperature metrology

Black bodies

Calibration

Detection and tracking algorithms

Back to Top