Paper
16 August 2000 Short-pulse laser removal of organic coatings
Author Affiliations +
Abstract
A major problem in the regular maintenance of aerospace systems is the removal of paint and other protective coatings from surfaces without polluting the atmosphere or endangering workers. Recent research has demonstrated that many organic coatings can be removed from surfaces efficiently using short laser pulses without the use of any chemical agents. The lasers employed in this study were repetitively-pulsed neodymium YAG devices operating at 1064 nm (15 - 30 ns, 10 - 20 Hz). The efficiency of removal can be cast in terms of an effective heat of ablation, Q* (kJ of laser energy incident per g of paint removed), although, for short pulses, the mechanism of removal is believed to be dominated more by thermo- mechanical or shock effects than by photo-ablation. Q* data were collected as a function of pulse fluence for several paint types. For many paint types, there was a fairly sharp threshold fluence per pulse near 1 J/cm2, above which Q* values dropped to levels which were a factor of four lower than those observed for long- pulse or continuous laser ablation of paint. In this regime, the coating is removed in fairly large particles or, in the case of one paint, the entire thickness of the coating was removed over the exposed area in one pulse. Hardware for implementing short-pulse laser paint stripping in the field is under development and will be highlighted in the presentation. Practical paint stripping rates achieved using the prototype hardware are presented for several paint types.
© (2000) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Craig T. Walters "Short-pulse laser removal of organic coatings", Proc. SPIE 4065, High-Power Laser Ablation III, (16 August 2000); https://doi.org/10.1117/12.407381
Lens.org Logo
CITATIONS
Cited by 4 scholarly publications and 1 patent.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Pulsed laser operation

Prototyping

Aluminum

Laser ablation

Carbon dioxide lasers

Composites

Laser applications

RELATED CONTENT

Multispectral MPC detectors in the range 0.6 divided by 12...
Proceedings of SPIE (November 02 2000)
Impulse generated from laser targets
Proceedings of SPIE (February 01 2000)
High power, diode pumped Er YAG lasers for soft and...
Proceedings of SPIE (June 02 2011)
Job Shopping For The Aerospace Industry
Proceedings of SPIE (January 01 1987)

Back to Top