Paper
22 January 2001 Development of a MoSi-based bilayer HT-PSM blank for ArF lithography
Shuichiro Kanai, Susumu Kawada, Akihiko Isao, Takaei Sasaki, Kazuyuki Maetoko, Nobuyuki Yoshioka
Author Affiliations +
Abstract
Attenuated PSM (Phase Shifting Mask) is needed at an early stage of ArF lithography. For HT (Half Tone)-PSM, some materials have been introduced in recent years. We also surveyed several materials for HT-PSM blank. We think MoSiON is the best material if it can be applied to ArF lithography. Because it could be processed with the same mask processors as KrF HT-PSM could be. However we did not get practical MoSiON film for ArF lithography with our conventional DC sputtering method. So we have developed a new sputtering method to get small k (extinction coefficient) with T6% blank at 193nm wavelength. The properties of the MoSiON films obtained by this method have been evaluated, such as optical properties, chemical durability, ArF laser irradiation durability and pattern profile for feasibility. These results indicate that ULCOAT T6% bi-layer MoSiON blank is feasible for 193nm lithography.
© (2001) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Shuichiro Kanai, Susumu Kawada, Akihiko Isao, Takaei Sasaki, Kazuyuki Maetoko, and Nobuyuki Yoshioka "Development of a MoSi-based bilayer HT-PSM blank for ArF lithography", Proc. SPIE 4186, 20th Annual BACUS Symposium on Photomask Technology, (22 January 2001); https://doi.org/10.1117/12.410767
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Lithography

193nm lithography

Sputter deposition

Transmittance

Dry etching

Photomasks

Inspection

Back to Top