Low-cost organic pulse sources for integrated optical modules

Jussi A. Hiltunen; Juha T. Rantala

doi:10.1117/12.426862

Translator Disclaimer

15 May 2001 Low-cost organic pulse sources for integrated optical modules

Jussi A. Hiltunen, Juha T. Rantala

Author Affiliations +

Proceedings Volume 4284, Functional Integration of Opto-Electro-Mechanical Devices and Systems; (2001) https://doi.org/10.1117/12.426862
Event: Symposium on Integrated Optics, 2001, San Jose, CA, United States

Abstract

The transient and steady state performance of organic light- emitting devices (OLEDs) has been investigated with a view towards suitability for pulse sources. The rise and fall times of the electroluminescence of the different structures and materials were afforded special attention. The tested devices cover single and multi-layer structures with different layer thicknesses. Both molecular and polymeric- based devices were tested. Molecular materials used in the OLEDs were N, N'-bis(3-methylphenyl)-N,N'-diphenylbenzidine (TPD) as a hole transporter, tris-(8-hydroxyquinolate) aluminum (Alq₃) as an electron transporter/emitter and 4,7-diphenyl-1,10-phenanthroline (BCP) as a hole blocking material. Poly)2-methoxy, 5-(2'-ethyl-hexoxy)-1,4- phenylene-vinylene) (MEH-PPV) and poly(3,4- ethylenedioxythiophene)/poly(styrene) (PEDOT/PSS) were the polymeric materials used in the devices. The effect of the driving voltage on the response time and the current density in transients was under investigation. In addition, changes in the response time were studied, when the bias voltage was applied.

Citation Download Citation

Jussi A. Hiltunen and Juha T. Rantala "Low-cost organic pulse sources for integrated optical modules", Proc. SPIE 4284, Functional Integration of Opto-Electro-Mechanical Devices and Systems, (15 May 2001); https://doi.org/10.1117/12.426862

ACCESS THE FULL ARTICLE