You have requested a machine translation of selected content from our databases. This functionality is provided solely for your convenience and is in no way intended to replace human translation. Neither SPIE nor the owners and publishers of the content make, and they explicitly disclaim, any express or implied representations or warranties of any kind, including, without limitation, representations and warranties as to the functionality of the translation feature or the accuracy or completeness of the translations.
Translations are not retained in our system. Your use of this feature and the translations is subject to all use restrictions contained in the Terms and Conditions of Use of the SPIE website.
13 June 2001Experiences with fiber optic Bragg grating sensors in civil engineering
Initially developed for applications in the aerospace industry, fiber-optic Bragg grating sensors (FBG) have attracted attention in the civil engineering community. The interest in FBG sensors has been motivated by the potential advantages they can offer over existing sensing technologies. They are, immune to electromagnetic interference, small in size and can be easier to install than traditional electrical resistance strain gauges. They can also be multiplexed, that is, a single fiber may have more than one change. Although field test of FBG sensors have been reported in literature, there is a dearth of information on their installation procedures, their precision in quantifying strains of concrete structures, and robustness requirements for embedment in concrete structures. In particular the harsh environment during the construction of concrete structures is a great challenge in the installation of these fragile sensors. The paper reports on our experiences with FBG sensors in concrete structures. FBG sensor have been sued to quantify strain, temperature and to capture vibration signals. Th result of these studies indicate that, if properly installed, FBG sensors can survive the sever conditions associated with the embedment process and yield accurate measurements of strains and vibration response, so it is possible to benefit from their potential advantages.
The alert did not successfully save. Please try again later.
James M. W. Brownjohn, Pilate Moyo, Yong Wang, Chuan Swee Tjin, Tuan-Kay Lim, "Experiences with fiber optic Bragg grating sensors in civil engineering," Proc. SPIE 4317, Second International Conference on Experimental Mechanics, (13 June 2001); https://doi.org/10.1117/12.429578