Design of focused single-element (50 to 100 MHz) transducers using lithium niobate

Jonathan Matthew Cannata; Timothy A. Ritter; WoHsing Chen; K. Kirk Shung

doi:10.1117/12.428215

30 May 2001 Design of focused single-element (50 to 100 MHz) transducers using lithium niobate

Jonathan Matthew Cannata, Timothy A. Ritter, WoHsing Chen, K. Kirk Shung

Author Affiliations +

Proceedings Volume 4325, Medical Imaging 2001: Ultrasonic Imaging and Signal Processing; (2001) https://doi.org/10.1117/12.428215
Event: Medical Imaging 2001, 2001, San Diego, CA, United States

Abstract

This paper discusses two fabrication procedures used to build LiNbO₃ single element ultrasonic transducers with center frequencies in the 50-100 MHz range. Transducers of varying dimensions were built for an f-number range of 1.5- 3.0. A conductive quarter wavelength silver epoxy matching layer, and a conductive silver epoxy backing, were used in all designs. The desired focal depths were achieved by either casting an acoustic lens on the transducer face or press-focusing the piezoelectric into a spherical curvature. For lens-focusing transducers the lens material EPO-TEK 301 was modeled as a second matching layer. The pressed-focused transducer design utilized parylene as the second matching layer. For devices that required electrical impedance matching, a low impedance transmission line coaxial cable was used. All transducers were tested in a pulse-echo insertion loss arrangement, whereby the center frequency, bandwidth, insertion loss, and focal depth were measured. Several transducers were fabricated with center frequencies in the 50 to 100 MHz range. The measured -6dB bandwidths and two-way insertion loss values ranged from 33% to 70% and 12.5dB to 23.0dB, respectively. Both the lens-focusing and press-focusing techniques were successful in producing the desired focal depth without significantly compromising device sensitivity and bandwidth.

Citation Download Citation

Jonathan Matthew Cannata, Timothy A. Ritter, WoHsing Chen, and K. Kirk Shung "Design of focused single-element (50 to 100 MHz) transducers using lithium niobate", Proc. SPIE 4325, Medical Imaging 2001: Ultrasonic Imaging and Signal Processing, (30 May 2001); https://doi.org/10.1117/12.428215

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE