Acoustic emission detection using fiber Bragg gratings

Ignacio M. Perez; Hongliang Cui; Eric Udd

doi:10.1117/12.435542

6 August 2001 Acoustic emission detection using fiber Bragg gratings

Ignacio M. Perez, Hongliang Cui, Eric Udd

Proceedings Volume 4328, Smart Structures and Materials 2001: Sensory Phenomena and Measurement Instrumentation for Smart Structures and Materials; (2001) https://doi.org/10.1117/12.435542
Event: SPIE's 8th Annual International Symposium on Smart Structures and Materials, 2001, Newport Beach, CA, United States

Abstract

A systematic study of acoustic emission detection using fiber Bragg grating sensors has been carried out over the last year. In this, we attempt to use the fiber Bragg grating to sense the dynamic strain created by a passing ultrasonic wave signal. Our goal here is to see if such a sensor is possible, and if so, what the detection sensitivity and limitations will be. To answer these questions, we carried out several experiments involving the detection of simulated acoustic emission events. In the first experiment, we attach fiber Bragg grating to the surface of a piezoceramic resonator which is driven by a signal generator. We were able to detect the resulting surface vibration of the resonator up to 2.1 MHz. In the second experiment, we attach a fiber Bragg grating to the surface of an aluminum plate. We excite an acoustic wave using an ultrasonic transducer located at various positions of the aluminum plate. In this way, we demonstrated that the fiber Bragg Grating sensor is capable of picking up the signal coming from a distance (up to 30 cm) for up to 2.5 MHz. In a third experiment, we use the same fiber Bragg grating on aluminum plate set up, but set up an acoustic signal by either a gentle knock on the plate by a pin, or by breaking a pencil lead on the plate. We were able to detection acoustic emission set up by pencil lead breaking up to a frequency of 30 kHz. Higher frequency components were not detected mainly due to the limitation of available electronic equipment at this time (higher frequency band-pass filters and amplifiers. In all the above-mentioned experiments we use a match Bragg grating to demodulate the detected optical signal and use a dual channel scheme for electronic data acquisition and processing (a signal channel and a reference channel).

Citation Download Citation

Ignacio M. Perez, Hongliang Cui, and Eric Udd "Acoustic emission detection using fiber Bragg gratings", Proc. SPIE 4328, Smart Structures and Materials 2001: Sensory Phenomena and Measurement Instrumentation for Smart Structures and Materials, (6 August 2001); https://doi.org/10.1117/12.435542

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available