Quantifying EUV imaging tolerances for the 70-, 50-, 35-nm modes through rigorous aerial image simulations

Christof G. Krautschik; Masaaki Ito; Iwao Nishiyama; Takashi Mori

doi:10.1117/12.436684

20 August 2001 Quantifying EUV imaging tolerances for the 70-, 50-, 35-nm modes through rigorous aerial image simulations

Christof G. Krautschik, Masaaki Ito, Iwao Nishiyama, Takashi Mori

Author Affiliations +

Proceedings Volume 4343, Emerging Lithographic Technologies V; (2001) https://doi.org/10.1117/12.436684
Event: 26th Annual International Symposium on Microlithography, 2001, Santa Clara, CA, United States

Abstract

According to the International Technology Roadmap (ITRS) EUV exposure tools are expected to support both logic and memory manufacturing for the 70 nm node and beyond. In order to meet the CD control and overlay requirements at the expected tolerance levels for high volume manufacturing, tool performance from ideal need to be assessed and quantified, the impact of lens aberrations and flare to the aerial image at the system level were studied for three different technology nodes of interest: 70, 50, and 35 nm. This was done by computing the electric field at the mask level by making use of a rigorous mask simulator based on the differential method. The subsequent aerial image was then computed by suing a standard scalar imaging model. The effects on critical dimensions (CDs) through focus as well as overlay were investigated in order to arrive at a tolerance level for lens aberration and flare contribution at the system level. It is shown that isolated line CD control requirements set an upper limit on the overall imaging performance while for overlay both feature types seem to play a similar role that defines the tolerance limit. Mandating a 10% CD control range leads to a 30 milli Wave (RMS) aberration requirement. This conclusion was reached by analyzing the response of each of 37 Zernike coefficients separately for both isolated and nested lines. Employing two separate sets of KrF PMI data that were scaled to a range of RMS values seemed to further reinforce the previous aberration tolerancing conclusion. A separate but similar flare analysis indicates that cross field flare variations need o be controlled to within 2% to meet CD control requirements that are consistent with ITRS roadmap.

Citation Download Citation

Christof G. Krautschik, Masaaki Ito, Iwao Nishiyama, and Takashi Mori "Quantifying EUV imaging tolerances for the 70-, 50-, 35-nm modes through rigorous aerial image simulations", Proc. SPIE 4343, Emerging Lithographic Technologies V, (20 August 2001); https://doi.org/10.1117/12.436684

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available