You have requested a machine translation of selected content from our databases. This functionality is provided solely for your convenience and is in no way intended to replace human translation. Neither SPIE nor the owners and publishers of the content make, and they explicitly disclaim, any express or implied representations or warranties of any kind, including, without limitation, representations and warranties as to the functionality of the translation feature or the accuracy or completeness of the translations.
Translations are not retained in our system. Your use of this feature and the translations is subject to all use restrictions contained in the Terms and Conditions of Use of the SPIE website.
10 September 2001Critical evaluation of test patterns for EO system performance characterization
The traditional test pattern for end-to-end EO system performance testing in the laboratory has been the static 3- or 4-bar target. This choice was governed by linear systems approach. The introduction of under-sampled imagers such as IRFPAs (infrared focal plane array cameras) has challenged the testing community to develop an alternative test, because the occurrence of aliasing has a completely different effect on periodic targets (such as the bar target) and real, non-periodic targets. A new test should at least have the following properties: lab testing is objective and easy, the measure is representative for field performance, and modeling (sensor and human) the test should be relatively easy. Several alternative test methods and test patterns have already been proposed. An example is the TOD method that uses non-periodic test patterns. Other examples are the dynamic MRT that uses a moving 4-bar target, and the MTDP that uses the traditional static target but allows that not all four bars have to be present in the image. The development of real-time scene projection allows testing with real infrared targets under controlled conditions. The authors will discuss a large number of test patterns and methods and show their advantages and disadvantages for end-to-end EO system performance testing. They conclude that simple non-periodic spatial test patterns, such as used in the TOD, are the best choice for sensor performance characterization.
The alert did not successfully save. Please try again later.
Piet Bijl, J. Mathieu Valeton, Maarten A. Hogervorst, "Critical evaluation of test patterns for EO system performance characterization," Proc. SPIE 4372, Infrared Imaging Systems: Design, Analysis, Modeling, and Testing XII, (10 September 2001); https://doi.org/10.1117/12.439158