Fabricating 100-nm line patterns with high-transmittance ArF attenuated phase-shift masks

Haruo Iwasaki; Shinji Ishida; K. Tonai; Hiroshi Nozue

doi:10.1117/12.438333

5 September 2001 Fabricating 100-nm line patterns with high-transmittance ArF attenuated phase-shift masks

Haruo Iwasaki, Shinji Ishida, K. Tonai, Hiroshi Nozue

Author Affiliations +

Proceedings Volume 4409, Photomask and Next-Generation Lithography Mask Technology VIII; (2001) https://doi.org/10.1117/12.438333
Event: Photomask and Next Generation Lithography Mask Technology VIII, 2001, Kanagawa, Japan

Abstract

We have studied the optical proximity effect, the depth of focus (DOF) and the mask-error-enhancement factor (MEF) of ArF attenuated phase shift masks (att. PSMs) for the application to 100-nm logic gate patterns. In the previous work, we have compared the performances of the binary mask with those of the 6% transmittance ArF att. PSM for printing 100-nm lines, and we obtained the better performances on the att. PSM with the annular illumination. In this paper, we reported the evaluation results of the higher transmittance att. PSMs. We fabricated them with 6-20% transmittance (quartz reference). Those masks have TaSiO bi-layer shifter with two tones. We did not use assist bars. An ArF scanner with NA 0.60 and a positive chemically amplified ArF resist with the thickness of 0.4 um are used. 100 nm semi-dense lines with a pitch of 250 nm are exposed without bias and 100 nm isolated lines are exposed with biases of 5 -15 nm (on wafer). Our results show that the higher transmittance att. PSMs can improve the DOF and the MEF on both semi-dense lines and isolated lines. In our experiments, the highest transmittance of 20% gives the broadest DOF of 0.4 um and the smallest MEF of 1.78 and 1.11 for semi-dense lines and isolated lines respectively. However, some higher transmittance PSMs may create the side lobes on the large patterns. From these results, we demonstrated that that 10% transmittance is suitable for the ArF att. PSMs for the fabrication of 100 nm line patterns.

Citation Download Citation

Haruo Iwasaki, Shinji Ishida, K. Tonai, and Hiroshi Nozue "Fabricating 100-nm line patterns with high-transmittance ArF attenuated phase-shift masks", Proc. SPIE 4409, Photomask and Next-Generation Lithography Mask Technology VIII, (5 September 2001); https://doi.org/10.1117/12.438333

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available

Members: $17.00

Non-members: $21.00 ADD TO CART

PROCEEDINGS
13 PAGES

DOWNLOAD PAPER SAVE TO MY LIBRARY

GET CITATION

RIGHTS & PERMISSIONS

Get copyright permission Get copyright permission on Copyright Marketplace

KEYWORDS

Transmittance

Photomasks

Critical dimension metrology

Logic devices

Phase shifts

Printing

Semiconducting wafers

Show All Keywords

Keywords/Phrases

Search In:

Publication Years