Si-based multilayered print circuit board for MEMS packaging fabricated by Si deep etching, bonding, and vacuum metal casting

Yoichi Murakoshi; Kotaro Hanada; Yaomin Li; Kazuyoshi Uchino; Takaaki Suzuki; Ryutaro Maeda

doi:10.1117/12.449004

21 November 2001 Si-based multilayered print circuit board for MEMS packaging fabricated by Si deep etching, bonding, and vacuum metal casting

Yoichi Murakoshi, Kotaro Hanada, Yaomin Li, Kazuyoshi Uchino, Takaaki Suzuki, Ryutaro Maeda

Author Affiliations +

Proceedings Volume 4592, Device and Process Technologies for MEMS and Microelectronics II; (2001) https://doi.org/10.1117/12.449004
Event: International Symposium on Microelectronics and MEMS, 2001, Adelaide, Australia

Abstract

In our previous works, metal injection technique into small diameter (10 -100micrometers ) through holes was developed and applied for fabrication of Si based print circuit board. In the present work, we present the metal filling technology by vacuum casting into 3 dimensional through holes and trenches structure fabricated in stacked layered Si wafers prepared by fusion bonding of ICP etched Si wafers. Metal electrical feed through was successfully prepared by the method. Conventional print circuit boards have been fabricated with Epoxy resin based materials. In recent years Si is regarded as a candidate for next generation materials for print circuit board substrates, as the substrate whose thermal elongation same as the mounted chips is an ideal solution to residual stress problems in the elevated temperature application. In this report, we developed the double sided mountable stacked circuit board using Si deep etching technology and fusion bonding. This technology is expected to lead to the realization of the assembling of sensors, actuators and ICs, i.e. 3 dimensional MEMS packaging. In this report, we adopted micromachining technology to this application area and the special emphasis is placed on the low cost and reliable process development. The detailed items to be developed are shown as follows; 1) Development of Si wafer through holes penetration and trench formation by ICP etching. 2) Alignment and bonding of micromachined wafers. 3) Development of insulating layer with oxidation. 4) Development of formation of electrical feed through for stacked layers.

Citation Download Citation

Yoichi Murakoshi, Kotaro Hanada, Yaomin Li, Kazuyoshi Uchino, Takaaki Suzuki, and Ryutaro Maeda "Si-based multilayered print circuit board for MEMS packaging fabricated by Si deep etching, bonding, and vacuum metal casting", Proc. SPIE 4592, Device and Process Technologies for MEMS and Microelectronics II, (21 November 2001); https://doi.org/10.1117/12.449004

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available