Paper
29 October 2001 Novel chirp tuning technique for fiber Bragg gratings without center wavelength shift using simply supported beam
Author Affiliations +
Proceedings Volume 4595, Photonic Systems and Applications; (2001) https://doi.org/10.1117/12.446594
Event: International Symposium on Photonics and Applications, 2001, Singapore, Singapore
Abstract
We present a novel technique to produce adjustable chirped fiber gratings that allows the spectral width tuning without center wavelength shift. The chirp rate can be precisely controlled by bending the uniform fiber Bragg grating (FBG) surface-mounted on one side of a simply supported beam. This technique allows the dynamic control of the spectral width of the chirped grating. It has a simple structure with a linear strain gradient. Both compression and tension are simultaneously applied to the beam, so center wavelength shift is avoided. In the experiment, a maximum spectral width of 18.3 nm is obtained, which corresponds to a chirp rate of 3.05 nm/cm. To the best of our knowledge, this is the largest chirp rate produced on a uniform FBG by using strain-gradient beam tuning technique. The proposed technique can also be used to tune the chirp rate of a linearly chirped grating.
© (2001) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Yunqi Liu, Jianping Yao, Xinyong Dong, and Jiangliang Yang "Novel chirp tuning technique for fiber Bragg gratings without center wavelength shift using simply supported beam", Proc. SPIE 4595, Photonic Systems and Applications, (29 October 2001); https://doi.org/10.1117/12.446594
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Fiber Bragg gratings

Reflectivity

Signal detection

Microwave radiation

Modulation

Prisms

Phased array optics

RELATED CONTENT


Back to Top