Paper
28 December 2001 Appearance match between hardcopy and softcopy using lightness rescaling with black point adaptation
Kiyotaka Nakabayashi, Mark D. Fairchild
Author Affiliations +
Abstract
When we view a softcopy image on a CRT display, typical CRT white point color temperature is 9300K and standard ambient light is 5000K. In this case, the black on the CRT screen is lightened and the chromaticity of the black is far from the achromatic axis because of the reflection of ambient light on the CRT displays. Also, when viewing hardcopy in the same environment as a CRT monitor, the chromaticity of the printer black is far from the achromatic axis. If such a printer were the source device and CRT monitor the destination device, dark printer colors cannot be reproduced on the destination device because, for dark colors, the gamut of the destination is smaller than the gamut of the source. Thus, lightness compensation is needed to reproduce dark colors on destination device. Three methods were considered: (1) Simple lightness compression method, (2) Complete black point adaptation method that consists of mapping to the CRT black, (3) Incomplete black point adaptation method that is a compromise between method (1) and (2). Visual experiments were performed to investigate these methods. The results indicated that the appropriate black point adaptation ratio is located between softcopy and hardcopy black points.
© (2001) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Kiyotaka Nakabayashi and Mark D. Fairchild "Appearance match between hardcopy and softcopy using lightness rescaling with black point adaptation", Proc. SPIE 4663, Color Imaging: Device-Independent Color, Color Hardcopy, and Applications VII, (28 December 2001); https://doi.org/10.1117/12.452991
Lens.org Logo
CITATIONS
Cited by 2 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
CRTs

Printing

Visualization

Visual system

Colorimetry

Reflection

RGB color model

Back to Top