Thermomechanical modeling of the pin-chucked EUV reticle during exposure

Alexander C. Wei; Carl J. Martin; William A. Beckman; John W. Mitchell; Roxann L. Engelstad; Edward G. Lovell; Kenneth L. Blaedel

doi:10.1117/12.472349

1 July 2002 Thermomechanical modeling of the pin-chucked EUV reticle during exposure

Alexander C. Wei, Carl J. Martin, William A. Beckman, John W. Mitchell, Roxann L. Engelstad, Edward G. Lovell, Kenneth L. Blaedel

Author Affiliations +

Proceedings Volume 4688, Emerging Lithographic Technologies VI; (2002) https://doi.org/10.1117/12.472349
Event: SPIE's 27th Annual International Symposium on Microlithography, 2002, Santa Clara, California, United States

Abstract

Extreme ultraviolet (EUV) lithography has emerged as the forerunner in the selection process to become the industry's choice as the technology for next-generation lithography (NGL). An advantageous characteristic of the EUV reticle is that it is reflective, so it can be chucked across the entirety of its backside. This chucking will aid in meeting flatness requirements as well enhancing the heat removal ability of the chuck when compared to the mounts used for optical reticles. The EUV exposure process occurs in a vacuum environment, which precludes the use of vacuum chucks; therefore, electrostatic chucks are the favored choice. One concern is that particles may become lodged between the chuck and reticle, causing distortions to occur once the reticle is chucked flat. To counter this effect, electrostatic pin chucks have been proposed. However, because of the lower heat transfer ability of the pin chuck due to the interstitial gap, thermal issues may arise. A predominant pin-chuck configuration has yet to emerge, and there is no set of standards to facilitate new designs. The intent of this paper is to provide general guidelines to assist in preliminary designs. Parameters that were seen as potentially important factors in pin chuck performance were chosen and the results are presented.

Citation Download Citation

Alexander C. Wei, Carl J. Martin, William A. Beckman, John W. Mitchell, Roxann L. Engelstad, Edward G. Lovell, and Kenneth L. Blaedel "Thermomechanical modeling of the pin-chucked EUV reticle during exposure", Proc. SPIE 4688, Emerging Lithographic Technologies VI, (1 July 2002); https://doi.org/10.1117/12.472349

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available