SEM review and discrete inspection of optically invisible defects in a production environment

Benoit Hinschberger; Christine Gombar; Laurent Ithier; Laurent Couturier; Boris Sherman; Ofer Rothlevi; Ariel Ben-Porath

doi:10.1117/12.475657

12 July 2002 SEM review and discrete inspection of optically invisible defects in a production environment

Benoit Hinschberger, Christine Gombar, Laurent Ithier, Laurent Couturier, Boris Sherman, Ofer Rothlevi, Ariel Ben-Porath

Author Affiliations +

Proceedings Volume 4692, Design, Process Integration, and Characterization for Microelectronics; (2002) https://doi.org/10.1117/12.475657
Event: Design, Process Integration, and Characterization for Microelectronics, 2002, Santa Clara, CA, United States

Abstract

Timely detection and prevention of defect excursions is the primary goal of any yield enhancement methodology in a wafer processing fab. Contamination killer defects are traditionally at the focus of such efforts. However, systematic process-induced defects are increasingly impacting the yield in the contemporary manufacturing environment, which is characterized by rapid modifications, constantly decreasing design rules and narrowing process windows. While the treatment of killer random defects remains important, the emphasis on yield-limiting problems is shifting to subtle treatment of killer random defects remains important, the emphasis on yield-limiting problems is shifting to subtle precursor phenomena, before the tool yield is severally damaged. Common light-scattering inspection is limited when applied to early symptoms of process deterioration, such as defects below 100nm or those lying in trenches. Electrical defects are even more challenging, since in most cases they are entirely undetectable by optical means. Disconnected metal plugs, under-etch of contact and via holes, implant variations undetectable by optical means. Disconnected metal plugs, under-etch of contact and via holes, implant variations on active area, gate to active area shorts, junction leakage - all of them can produce an electrical signature that can be detected with electron beam microscopy using Voltage Contrast imaging. In this paper, we describe a methodology implemented at the STMicroelectronics fab in Crolles, France, that addresses the above issues. SEM reviews and discrete inspections with a SEMVision cX were used for characterization of a variety of optically invisible defects on several critical inspection steps: Shallow Trench Isolation after etch and CMP, Polysilicon after etch, Via after etch, Tungsten plugs after CMP, Aluminum metal lines after etch and Copper metal lines after CMP.

Citation Download Citation

Benoit Hinschberger, Christine Gombar, Laurent Ithier, Laurent Couturier, Boris Sherman, Ofer Rothlevi, and Ariel Ben-Porath "SEM review and discrete inspection of optically invisible defects in a production environment", Proc. SPIE 4692, Design, Process Integration, and Characterization for Microelectronics, (12 July 2002); https://doi.org/10.1117/12.475657

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available