Adhesively bonded optical sensors: stress transfer and durability

Arne Skontorp; Jean-Marie Guerin

doi:10.1117/12.472621

27 June 2002 Adhesively bonded optical sensors: stress transfer and durability

Arne Skontorp, Jean-Marie Guerin

Proceedings Volume 4694, Smart Structures and Materials 2002: Smart Sensor Technology and Measurement Systems; (2002) https://doi.org/10.1117/12.472621
Event: SPIE's 9th Annual International Symposium on Smart Structures and Materials, 2002, San Diego, California, United States

Abstract

In this study, adhesively bonded optical fibers and Bragg grating sensors were investigated. The primary objectives were to assess the durability of the optical fiber-to-composite bond during loading and how that load was transferred from the structure to the optical fiber sensor. Using a two-phase epoxy and a highly reproducible bonding technique, different specimen configurations were fabricated and tested under cyclic fatigue loading. The parameters that were considered were the orientation of the top ply of the composite and the loading direction relative to the optical fiber. In addition, the load transfer from the structural composite to the optical sensor was studied numerically and experimentally. In all the specimen configurations studied, cyclic fatigue to 0.3% strain did not lead to cracking of the bond up to 500,000 cycles. The bonded sensor performance was unchanged during these experiments. A bonded optical sensor was proven functional up to 0.55% strain, where the composite failed. The top ply orientation of the laminate relative to the optical fiber did not seem to have a significant effect, although the stress analysis showed that the stresses in the adhesive and the part of the fiber nearest to the substrate did vary significantly. The stress analysis further indicated that loading transverse to the bonded optical fiber should be most critical in terms of bond durability. The analysis showed that strain is primarily transferred along the fiber axis, not in the transverse direction. Thus, the strain state in the bonded fiber may be approximated to that in an axially loaded free fiber.

Citation Download Citation

Arne Skontorp and Jean-Marie Guerin "Adhesively bonded optical sensors: stress transfer and durability", Proc. SPIE 4694, Smart Structures and Materials 2002: Smart Sensor Technology and Measurement Systems, (27 June 2002); https://doi.org/10.1117/12.472621

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available