Translator Disclaimer
Paper
27 June 2002 Temperature-compensated strain measurement using FBG sensors embedded in composite laminates
Author Affiliations +
Abstract
For accurate strain measurement by fiber Bragg grating (FBG) sensors, it is necessary to compensate the influence of temperature change. In this study two devices using FBG sensors have been developed for temperature-compensated strain measurement. They are named hybrid sensor and laminate sensor, respectively. The former consists of two different materials connected in series: carbon fiber reinforced plastic (CFRP) and glass fiber reinforced plastic (GFRP). Each material contains an FBG sensor with a different Bragg wavelength, and both ends of the device are glue to a structure. Using the difference of their Young's moduli and coefficients of thermal expansion (CTEs), both strain and temperature can be measured. The latter sensor is a laminate of two 90 degree(s) plies of CFRP and an epoxy plate, and an FBG sensor is embedded in the epoxy plate. When the temperature changes, the cross section of the optical fiber is deformed by the thermal residual stress. The deformation of the fiber causes the birefringence and widens the reflection spectrum. Since the temperature can be calculated from the spectrum width, which changes in proportion to the temperature, the accuracy of the strain measurement is improved. The usefulness of these sensors were experimentally confirmed.
© (2002) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Nobuhira Tanaka, Yoji Okabe, and Nobuo Takeda "Temperature-compensated strain measurement using FBG sensors embedded in composite laminates", Proc. SPIE 4694, Smart Structures and Materials 2002: Smart Sensor Technology and Measurement Systems, (27 June 2002); https://doi.org/10.1117/12.472634
PROCEEDINGS
10 PAGES


SHARE
Advertisement
Advertisement
Back to Top