Mechanical properties of dielectric elastomer actuators with smart metallic compliant electrodes

Mohammed Benslimane; Peter Gravesen; Peter Sommer-Larsen

doi:10.1117/12.475160

11 July 2002 Mechanical properties of dielectric elastomer actuators with smart metallic compliant electrodes

Mohammed Benslimane, Peter Gravesen, Peter Sommer-Larsen

Proceedings Volume 4695, Smart Structures and Materials 2002: Electroactive Polymer Actuators and Devices (EAPAD); (2002) https://doi.org/10.1117/12.475160
Event: SPIE's 9th Annual International Symposium on Smart Structures and Materials, 2002, San Diego, California, United States

Abstract

Dielectric elastomer actuator technology is based on electric field induced deformation. From the viewpoint of materials technology, many points must be addressed, among which are material dielectric properties, breakdown voltage, viscoelastic losses and elastomer spring mechanical properties. From the viewpoint of actuator manufacturing, we will mention elastomer thin film and fiber processing as well as compliant electrode design. However, among all the previously mentioned key-points, compliant electrode design remains the major problem to solve, as electrodes required to distribute the electric field in the material need to be at least as compliant as the active elastomer material. In this paper, we present the analysis of dielectric elastomer-based actuators made with metallic compliant electrodes that show a relatively good overall mechanical performance. Large displacements, force densities and low creep, as well as fast response and million cycles are achieved using micro-structuring and thin-film techniques. We have succeeded in making smart anisotropic compliant metallic electrodes that can maintain conductivity up to 33% expansion before breaking and loosing electrical connectivity. Actuators are made with a silicone elastomer as the active material and silver as coating electrodes. The spring constant of a 3-layer actuator consisting of silver electrodes with a thickness up to 1100 A and elastomer film with a thickness up to 50 micrometers is typically 2 times larger than that of the elastomer film taken alone. Force-displacement and constant load measurements are used as a basis to analyze the mechanical properties of the artificial muscle. Capacity measurements at high frequency in the kilohertz range are carried out to study the built-in sensor properties for feedback control of the actuator.

Citation Download Citation

Mohammed Benslimane, Peter Gravesen, and Peter Sommer-Larsen "Mechanical properties of dielectric elastomer actuators with smart metallic compliant electrodes", Proc. SPIE 4695, Smart Structures and Materials 2002: Electroactive Polymer Actuators and Devices (EAPAD), (11 July 2002); https://doi.org/10.1117/12.475160

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available