You have requested a machine translation of selected content from our databases. This functionality is provided solely for your convenience and is in no way intended to replace human translation. Neither SPIE nor the owners and publishers of the content make, and they explicitly disclaim, any express or implied representations or warranties of any kind, including, without limitation, representations and warranties as to the functionality of the translation feature or the accuracy or completeness of the translations.
Translations are not retained in our system. Your use of this feature and the translations is subject to all use restrictions contained in the Terms and Conditions of Use of the SPIE website.
13 August 2002Comparison of sensors in the 0.9- to 14-micron region against beach obstacles and mines
This paper describes the results of a pair of experiments to compare the performance of a collection of infrared sensors for imaging obstacles and mines in the surf zone regions. Results include a statistical and subjective analysis of the imagery. Emphasis is placed on sensor performance during thermal crossover, day/night transitions, and nighttime operations. Also the sensitivity required for imaging obstacles in water is measured.
Tony D. Jones andCheryl M. Smith
"Comparison of sensors in the 0.9- to 14-micron region against beach obstacles and mines", Proc. SPIE 4742, Detection and Remediation Technologies for Mines and Minelike Targets VII, (13 August 2002); https://doi.org/10.1117/12.479089
The alert did not successfully save. Please try again later.
Tony D. Jones, Cheryl M. Smith, "Comparison of sensors in the 0.9- to 14-micron region against beach obstacles and mines," Proc. SPIE 4742, Detection and Remediation Technologies for Mines and Minelike Targets VII, (13 August 2002); https://doi.org/10.1117/12.479089