Paper
1 August 2002 Improved method for measuring and assessing reticle pinhole defects for the 100-nm lithography node
Author Affiliations +
Abstract
With the approach of the 100nm-lithography node, an accurate and reliable method of measuring reticle pinhole defects becomes necessary to assess the capabilities of high-end reticle inspection equipment. The current measurement method of programmed defect pinholes consists of using a SEM. While this method is repeatable, it does not reliably represent the true nature of a pinhole. Earlier studies have suggested that since the SEM images only a top down view of the pinhole, the measurement does not accurately account for edge wall angle and partial filling which both reduce pinhole transmission and subsequent printability. Since wafer lithography and reticle inspection tools use transmitted illumination, pinhole detection performance based on SEM measurements is often erroneous. In this study, a pinhole test reticle was manufactured to further characterize the capabilities of a transmission method to measure pinholes.
© (2002) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Darren Taylor, Anthony Vacca, and Larry S. Zurbrick "Improved method for measuring and assessing reticle pinhole defects for the 100-nm lithography node", Proc. SPIE 4754, Photomask and Next-Generation Lithography Mask Technology IX, (1 August 2002); https://doi.org/10.1117/12.476917
Lens.org Logo
CITATIONS
Cited by 11 patents.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Scanning electron microscopy

Reticles

Photomasks

Inspection

Lithography

Metrology

Semiconducting wafers

Back to Top