Required performances of reticle inspection system for ArF lithography through analysis of defect printability study

Byung Gook Kim; Keishi Tanaka; Nobuyuki Yoshioka; Naohisa Takayama; Keiichi Hatta; Shingo Murakami; Masao Otaki

doi:10.1117/12.476960

1 August 2002 Required performances of reticle inspection system for ArF lithography through analysis of defect printability study

Byung Gook Kim, Keishi Tanaka, Nobuyuki Yoshioka, Naohisa Takayama, Keiichi Hatta, Shingo Murakami, Masao Otaki

Author Affiliations +

Proceedings Volume 4754, Photomask and Next-Generation Lithography Mask Technology IX; (2002) https://doi.org/10.1117/12.476960
Event: Photomask and Next Generation Lithography Mask Technology IX, 2002, Yokohama, Japan

Abstract

Semiconductor industry still inspect reticle with the i-line wavelength and ITRS indicates only minimum defect size corresponds to 20 percent of the pattern size on mask in the same light. Currently defect definition, however, varies from the fixed minimum defect size to non-printable-maximum defect size due to increased reticle cost. This paper provides an investigation of requirements of current inspection system 193nm lithography. The lines and contact holes patterns were also investigated by both simulation and experiment. The printability of defects was observed under the various circumstances such as pitch variation and transmission of halftone film. From the defect printability study we found that defect printability behave non-linearly as the exposure condition varies and the size defect should be treated importantly as the ArF lithography extends till 70nm era. It is also understood that there is a possibility to miss the important meaning of the size defects from the simple definition of reticle defect. From the analysis of various types of defects and exposure conditions we suggested detail level of inspection sensitivity that new reticle inspection system should be ready.

Citation Download Citation

Byung Gook Kim, Keishi Tanaka, Nobuyuki Yoshioka, Naohisa Takayama, Keiichi Hatta, Shingo Murakami, and Masao Otaki "Required performances of reticle inspection system for ArF lithography through analysis of defect printability study", Proc. SPIE 4754, Photomask and Next-Generation Lithography Mask Technology IX, (1 August 2002); https://doi.org/10.1117/12.476960

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE