Paper
26 November 2002 Current mode operation of a Cd0.9Zn0.1Te detector for CT imaging
William C. Barber, Koji Iwata, Bruce H. Hasegawa, Paul R. Bennett, Leonard J. Cirignano, Kanai S. Shah
Author Affiliations +
Abstract
We have developed a simultaneous CT/SPECT imager using a single Cd0.9Zn0.1Te detector in pulse counting mode. Pulse height energy discrimination is used to separate the CT and SPECT data. In pulse counting mode the x-ray flux into the detector must remain below 3 105cps for a linear count rate response. Our SPECT images compare to current clinical systems but our CT images have poor contrast resolution due to the low x-ray flux used to reduce the total photon flux in the detector and pulse pile-up. We are investigating a current mode operation of the detector to obtain high-resolution CT images. Count rate linearity measurements show three orders of magnitude increase in the maximum count rate of the detector and promises to improve the quality of our CT images from the system. Ultimately, interlaced CT/SPECT data could be obtained with no loss in the quality of the SPECT images, and with a significant improvement in the CT images.
© (2002) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
William C. Barber, Koji Iwata, Bruce H. Hasegawa, Paul R. Bennett, Leonard J. Cirignano, and Kanai S. Shah "Current mode operation of a Cd0.9Zn0.1Te detector for CT imaging", Proc. SPIE 4786, Penetrating Radiation Systems and Applications IV, (26 November 2002); https://doi.org/10.1117/12.455944
Lens.org Logo
CITATIONS
Cited by 4 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Sensors

X-rays

X-ray computed tomography

Single photon emission computed tomography

X-ray detectors

Tellurium

X-ray imaging

RELATED CONTENT


Back to Top