You have requested a machine translation of selected content from our databases. This functionality is provided solely for your convenience and is in no way intended to replace human translation. Neither SPIE nor the owners and publishers of the content make, and they explicitly disclaim, any express or implied representations or warranties of any kind, including, without limitation, representations and warranties as to the functionality of the translation feature or the accuracy or completeness of the translations.
Translations are not retained in our system. Your use of this feature and the translations is subject to all use restrictions contained in the Terms and Conditions of Use of the SPIE website.
22 May 2002Laser-based modal analysis of smart electronic structures
1Fraunhofer Institute for Reliability and Microintegration (Germany) 2AMITRONICS Angewandte Mikromechatronik GmbH (Germany) 3Fraunhofer Institut Zuverlaessigkeit und Mikrointe (Germany)
For a life time optimized construction the knowlegde of dynamical assemblies load is one of the basic requirements. This fact is especially relevant for smart electronic structures. To analyze the load vibration investigations and vibration tests are necessary. For such investigations ofelectronic structures contactless working lasertechniques are used. In the last few years experimental modal analyses based on laser vibrometers have been established. The results of such analyses show eigenfrequencies, vibration amplitudes and mode shapes. Based on this structural modifications concerning a vibrational optimization are inferable.
The alert did not successfully save. Please try again later.
Rene Schnitzer, Norbert Ruemmler, Bernd Michel, "Laser-based modal analysis of smart electronic structures," Proc. SPIE 4827, Fifth International Conference on Vibration Measurements by Laser Techniques: Advances and Applications, (22 May 2002); https://doi.org/10.1117/12.468178