Paper
19 November 2003 Sol-gel hybrid channel waveguide fabrication using UV excimer laser patterning
P. J. Moreira, P. V.S. Marques, Antonio M. P. P. Leite
Author Affiliations +
Proceedings Volume 4829, 19th Congress of the International Commission for Optics: Optics for the Quality of Life; (2003) https://doi.org/10.1117/12.525507
Event: 19th Congress of the International Commission for Optics: Optics for the Quality of Life, 2002, Florence, Italy
Abstract
Definition of channel waveguides on hybrid sol-gel material was demonstrated using a 248 nm UV excimer laser, without mixing organic photoinitiators in the solution preparation step. Thin films fabricated by hydrolysis and polycondensation of methacryloxypropyltrimethoxysilane (MAPTMS) doped with zirconium oxide were deposited by spin-coating on soda-lime glass substrates (n = 1.514). Channel waveguides were defined by microlithography and then covered by a protective layer composed of a combination of MAPTMS and tetramethoxysilane (TMOS). Finally, after cutting and polishing, the waveguides were optically characterized.
© (2003) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
P. J. Moreira, P. V.S. Marques, and Antonio M. P. P. Leite "Sol-gel hybrid channel waveguide fabrication using UV excimer laser patterning", Proc. SPIE 4829, 19th Congress of the International Commission for Optics: Optics for the Quality of Life, (19 November 2003); https://doi.org/10.1117/12.525507
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Channel waveguides

Ultraviolet radiation

Excimer lasers

Sol-gels

Optical lithography

Waveguides

Bioalcohols

Back to Top