Defect printability analysis on alternating phase-shifting masks for 193-nm lithography

Yasutaka Morikawa; Yousuke Totsu; Masaharu Nishiguchi; Morihisa Hoga; Naoya Hayashi; Linyong Pang; Gerard T. Luk-Pat

doi:10.1117/12.468210

27 December 2002 Study of Defect Printability Analysis on Alternating Phase Shifting Masks for 193 nm Lithography

Yasutaka Morikawa, Yousuke Totsu, Masaharu Nishiguchi, Morihisa Hoga, Naoya Hayashi, Linyong Pang, Gerard T. Luk-Pat

Author Affiliations +

Proceedings Volume 4889, 22nd Annual BACUS Symposium on Photomask Technology; (2002) https://doi.org/10.1117/12.468210
Event: Photomask Technology 2002, 2002, Monterey, CA, United States

Abstract

For alternating aperture phase shift masks (AAPSM), phase-defect detection and disposition is more difficult for 193 nm (ArF) lithography than for 248 nm (KrF) lithography, as pattern geometry is tighter and quartz etching is shallower. For ArF lithography, we designed and fabricated a new test mask to confirm detectability and printability of phase defects, extending our previous work for KrF lithography. This test mask has precise defect sizes and phase-error angles of 25, 50, and 75 degrees. Detectability was demonstrated on KLA-Tencor’s SLF27 and investigated by acquiring defect images on SLF27 and LaserTec’s MD3000 inspection systems. Printability was compared between actual wafer prints, and simulations from Carl Zeiss’ Aerial Image Measurement System (AIMS). Wafer prints were also simulated using Numerical Technologies’ software-based Virtual Stepper System, which takes inspection images as input and models the optical aspects of lithography. Virtual Stepper critical-dimension measurements show good general agreement with those from AIMS images and wafer-print SEM images. Compared to AIMS, which is a hardware-based simulator that uses the actual mask as input, the software-based Virtual Stepper System is easier to adapt to different processes and to integrate into the production flow.

Citation Download Citation

Yasutaka Morikawa, Yousuke Totsu, Masaharu Nishiguchi, Morihisa Hoga, Naoya Hayashi, Linyong Pang, and Gerard T. Luk-Pat "Study of Defect Printability Analysis on Alternating Phase Shifting Masks for 193 nm Lithography", Proc. SPIE 4889, 22nd Annual BACUS Symposium on Photomask Technology, (27 December 2002); https://doi.org/10.1117/12.468210

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE