Higher anisotropy and improved surface conditions for 90-nm-node MoSiON ICP dry etch

Dong-Soo Min; Byung-Soo Chang; Hyuk-Joo Kwon; Boo-Yeon Choi

doi:10.1117/12.467493

27 December 2002 Higher Anisotropy and Improved Surface Conditions for 90nm Node MoSiON ICP Dry Etch

Dong-Soo Min, Byung-Soo Chang, Hyuk-Joo Kwon, Boo-Yeon Choi

Author Affiliations +

Proceedings Volume 4889, 22nd Annual BACUS Symposium on Photomask Technology; (2002) https://doi.org/10.1117/12.467493
Event: Photomask Technology 2002, 2002, Monterey, CA, United States

Abstract

Embedded-attenuated phase shift masks (EAPSMs) have been an indispensable enabling technology for <130 nm node device fabrication. The precise etching of MoSiON is a key process in high quality phase shift mask manufacturing. Fluorine-based plasma chemistry has been used widely to date, but it is difficult to control CD (Critical Dimension) and phase uniformity. This stems mainly from the large Cr undercut and surface roughness due to the reaction of fluorine radicals with the phase shifting layer. In this paper, etch characteristics of the MoSiON layer using CF₄, O₂, and He in an inductively coupled plasma (ICP) were examined for the manufacturing of phase shift masks for 90-nm node design rules. The dependency of etch parameters such as ICP power, bias power (DC bias voltage), pressure, CF₄ concentration, and O₂ concentration on the etch properties of MoSiON were tested. We have investigated vertical slope, surface morphology, and minimum CD bias. This optimized process condition showed that intra-mask phase uniformity was below 1% (3-sigma) over a 135 mm × 135 mm mask area and transmittance uniformity was 8.68% ± 0.09%. CD uniformity was 5.5nm (3-sigma), CD linearity was 5.0nm over 300nm to 1300nm, and Cr-to-MoSiON CD bias was 2.0nm. The MoSiON profile was nearly vertical and the surface morphology was very clean.

Citation Download Citation

Dong-Soo Min, Byung-Soo Chang, Hyuk-Joo Kwon, and Boo-Yeon Choi "Higher Anisotropy and Improved Surface Conditions for 90nm Node MoSiON ICP Dry Etch", Proc. SPIE 4889, 22nd Annual BACUS Symposium on Photomask Technology, (27 December 2002); https://doi.org/10.1117/12.467493

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE