Paper
28 August 2002 Investigation of insertion loss characteristics of sampled fiber Bragg gratings
Rui Huang, Ronghui Qu, Aiping Luo, Kan Gao, Zujie Fang
Author Affiliations +
Proceedings Volume 4904, Optical Fiber and Planar Waveguide Technology II; (2002) https://doi.org/10.1117/12.481214
Event: Asia-Pacific Optical and Wireless Communications 2002, 2002, Shanghai, China
Abstract
Insertion loss characteristics of sampled fiber Bragg gratings were investigated theoretically and experimentally. The experiment results show that the LPG effect greatly influences the characteristics of insertion loss at the Bragg reflection wavelength when the LPG effect caused loss peak is coincide with the Bragg wavelength. This phenomenon will be obvious in the case of high duty-cycle of sampled fiber Bragg grating, for example, more than 1:9. Bending the SFBG will move the LPG-like loss peak and will then change the loss of SFBG reflection band. In experiment a reduction from 6.08dB to 2.56dB was obtained under a bend radius 17mm in a typical SFBG with duty-cycle 1:9.
© (2002) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Rui Huang, Ronghui Qu, Aiping Luo, Kan Gao, and Zujie Fang "Investigation of insertion loss characteristics of sampled fiber Bragg gratings", Proc. SPIE 4904, Optical Fiber and Planar Waveguide Technology II, (28 August 2002); https://doi.org/10.1117/12.481214
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Fiber Bragg gratings

Dense wavelength division multiplexing

Modulation

Cladding

Refractive index

Dispersion

Linear filtering

Back to Top