You have requested a machine translation of selected content from our databases. This functionality is provided solely for your convenience and is in no way intended to replace human translation. Neither SPIE nor the owners and publishers of the content make, and they explicitly disclaim, any express or implied representations or warranties of any kind, including, without limitation, representations and warranties as to the functionality of the translation feature or the accuracy or completeness of the translations.
Translations are not retained in our system. Your use of this feature and the translations is subject to all use restrictions contained in the Terms and Conditions of Use of the SPIE website.
20 September 2002Comparison of trap stiffness between a Solid Mode Optical Trap and a Do-nut Mode Optical Trap
Do-nut Mode Optical Trap is the kind of Optical Trap that the laser distribution in the center part of the beam is approximately zero. Because the trapping effect of an Optical Trap correlates closely with the distribution of optical field, the scattering force of Do-nut Mode Optical Trap is markedly reduced. We realized Do-nut Mode Optical Trap by rebuilding wave front. Then we studied the trapping effect and trap stiffness of Solid Mode Optical Trap and Do-nut Mode Optical Trap in the cases of upright microscope and inverted microscope. We measured the stiffness of the Optical Trap near the focus with Boltzmann statistics method.
The distribution of the optical field of Do-nut Optical Trap is like aura. And the trapping effect changes with the diameter ratio of the aura.
The alert did not successfully save. Please try again later.
H. T. Chen, Zan Gong, Y. M. Li, L. R. Lou, D. Zhang, L. H. Yin, "Comparison of trap stiffness between a solid-mode optical trap and a donut-mode optical trap," Proc. SPIE 4927, Optical Design and Testing, (20 September 2002); https://doi.org/10.1117/12.471436