Translator Disclaimer
Paper
13 November 2002 Ti-Mo and Mo-W mixed oxides for gas sensing applications
Author Affiliations +
Abstract
Molybdenum trioxide - tungsten trioxide (MoO3-WO3) and titanium oxide - molybdenum oxide (TiO2-MoO3) binary metal oxide thin films have been prepared by the sol-gel process and by PVD. The films were deposited using the spin coating technique and by sputtering onto alumina substrates with interdigital electrodes. MoO3-WO3 film morphology is composed of MoO3 needle like grains and WO3 spherical grains when annealed at 450°C. MoO3-TiO2 film morphology consists of a well-developed crystal structure for the sol-gel film and a porous morphology for the sputtered films when annealed at 800°C. The films exhibited selective gas sensing characteristics at an operating temperature of 300°C towards nitrogen dioxide (NO2). The RF and SG fabricated MoO3-TiO2 possess different gas sensing properties attributed to the fabrication and resulting morphological difference of the thin films.
© (2002) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Elisabetta Comini, Giorgio Sberveglieri, Kosmas Galatsis, and Wojtek Wlodarski "Ti-Mo and Mo-W mixed oxides for gas sensing applications", Proc. SPIE 4936, Nano- and Microtechnology: Materials, Processes, Packaging, and Systems, (13 November 2002); https://doi.org/10.1117/12.476100
PROCEEDINGS
8 PAGES


SHARE
Advertisement
Advertisement
RELATED CONTENT

Sol gel processed MoO3 and WO3 thin films for use...
Proceedings of SPIE (March 29 2004)
Chemical gas sensors on silicon
Proceedings of SPIE (September 15 1995)

Back to Top