Paper
30 May 2003 Investigation into screenless 3D TV
Christian Moller, Oliver S. Cossairt, Stephen A. Benton, Lucy Stockbridge, Adrian R. L. Travis
Author Affiliations +
Proceedings Volume 5006, Stereoscopic Displays and Virtual Reality Systems X; (2003) https://doi.org/10.1117/12.477274
Event: Electronic Imaging 2003, 2003, Santa Clara, CA, United States
Abstract
If a three dimensional image is to be projected into mid-air in a room with bare walls, then light must follow a curving path. Since this does not happen in a vacuum, a gradient must be introduced into the refractive index of air itself, which can be introduced by varying either the temperature or pressure of air. A reduction from 300°C to room temperature across the front of a 1 mm wide ray will bend it with a radius of curvature of 3 m. However the temperature gradient cannot be sustained without an unacceptably aggressive mechanism for cooling. The pressure gradients delivered by sound waves are dynamically sustainable, but even powers as extreme as 175 dBm at 25 kHz deliver a radius of curvature of only 63 m. It appears that something will have to be added to the air if such displays are to be possible.
© (2003) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Christian Moller, Oliver S. Cossairt, Stephen A. Benton, Lucy Stockbridge, and Adrian R. L. Travis "Investigation into screenless 3D TV", Proc. SPIE 5006, Stereoscopic Displays and Virtual Reality Systems X, (30 May 2003); https://doi.org/10.1117/12.477274
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Refractive index

Waveguides

3D displays

3D image processing

Ultrasonics

Curtains

Systems modeling

RELATED CONTENT


Back to Top