Paper
16 May 2003 Large-area interline CCD with low-dark current
Christopher Parks, David L. Losee
Author Affiliations +
Abstract
When interline CCD image sensors increase in size beyond 4 million pixels, CCD dark current begins to degrade the signal. Some scientific and photographic applications use very slow readout rates (less than 1 MHz) to reduce the noise level. At a 1-MHz readout rate, a 4-megapixel imager will take at least 4 s to read out. This extended time period allows a significant amount of dark current to build up and frustrate efforts to reduce noise. Often this situation leads to the additional expense of a low-temperature operation. The accumulation-mode readout method for interline CCD image sensors is being developed at Eastman Kodak Company. Previously, accumulation mode could only be applied to the full-frame architecture because the p-type substrate acted as a source for holes. Interline CCD image sensors with n-type substrates have no ready source of holes to accumulate the surface of the CCD under all phases. This problem has been overcome, allowing room-temperature operation without significant dark current generation.
© (2003) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Christopher Parks and David L. Losee "Large-area interline CCD with low-dark current", Proc. SPIE 5017, Sensors and Camera Systems for Scientific, Industrial, and Digital Photography Applications IV, (16 May 2003); https://doi.org/10.1117/12.476796
Lens.org Logo
CITATIONS
Cited by 6 scholarly publications and 1 patent.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Charge-coupled devices

CCD image sensors

Clocks

Electrons

Image sensors

Photodiodes

Sensors

Back to Top