A method for the calibration of 3D ultrasound transducers

Mark Hastenteufel; Sibylle Mottl-Link M.D.; Ivo Wolf; Raffaele de Simone M.D.; Hans-Peter Meinzer

doi:10.1117/12.479764

30 May 2003 A method for the calibration of 3D ultrasound transducers

Mark Hastenteufel, Sibylle Mottl-Link M.D., Ivo Wolf, Raffaele de Simone M.D., Hans-Peter Meinzer

Author Affiliations +

Proceedings Volume 5029, Medical Imaging 2003: Visualization, Image-Guided Procedures, and Display; (2003) https://doi.org/10.1117/12.479764
Event: Medical Imaging 2003, 2003, San Diego, California, United States

Abstract

Background: Three-dimensional (3D) ultrasound has a great potential in medical diagnostics. However, there are also some limitations of 3D ultrasound, e.g., in some situations morphology cannot be imaged accurately due to acoustical shadows. Acquiring 3D datasets from multiple positions can overcome some of these limitations. Prior to that a calibration of the ultrasound probe is necessary. Most calibration methods descibed rely on two-dimensional data. We describe a calibration method that uses 3D data. Methods: We have developed a 3D calibration method based on single-point cross-wire calibration using registration techniques for automatic detection of cross centers. For the calibration a cross consisting of three orthogonal wires is imaged. A model-to-image registration method is used to determine the cross center. Results: Due to the use of 3D data less acquisitions and no special protocols are necessary. The influence of noise is reduced. By means of the registration method the time-consuming steps of image plane alignment and manual cross center determination becomes dispensable. Conclusion: A 3D calibration method for ultrasound transducers is described. The calibration method is the base to extend state-of-the-art 3D ultrasound devices, i.e., to acquire multiple 3D, either morphological or functional (Doppler), datasets.

Citation Download Citation

Mark Hastenteufel, Sibylle Mottl-Link M.D., Ivo Wolf, Raffaele de Simone M.D., and Hans-Peter Meinzer "A method for the calibration of 3D ultrasound transducers", Proc. SPIE 5029, Medical Imaging 2003: Visualization, Image-Guided Procedures, and Display, (30 May 2003); https://doi.org/10.1117/12.479764

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE