You have requested a machine translation of selected content from our databases. This functionality is provided solely for your convenience and is in no way intended to replace human translation. Neither SPIE nor the owners and publishers of the content make, and they explicitly disclaim, any express or implied representations or warranties of any kind, including, without limitation, representations and warranties as to the functionality of the translation feature or the accuracy or completeness of the translations.
Translations are not retained in our system. Your use of this feature and the translations is subject to all use restrictions contained in the Terms and Conditions of Use of the SPIE website.
16 June 2003Fabrication of Step and Flash imprint lithography templates using commercial mask processes
This article presents the results of a collaborative effort between Molecular Imprints, Inc. (MII) and Photronics, Inc. to develop a baseline process for fabricating Step and Flash Imprint Lithography (S-FIL) templates that are compatible with lithography tools being developed by MII. S-FIL is a replication technique with sub-50nm resolution capability that has the potential to lead to a low cost, high throughput process. Template fabrication results and S-FIL patterning results on 200mm wafers are presented.
The alert did not successfully save. Please try again later.
Ecron Thompson, Peter D. Rhyins, Ronald D. Voisin, S. V. Sreenivasan, Patrick M. Martin, "Fabrication of Step and Flash imprint lithography templates using commercial mask processes," Proc. SPIE 5037, Emerging Lithographic Technologies VII, (16 June 2003); https://doi.org/10.1117/12.490141