Sidewall structure estimation from CD-SEM for lithographic process control

Philip R. Bingham; Jeffery R. Price; Kenneth W. Tobin Jr.; Thomas P. Karnowski; Marylyn Hoy Bennett; E. Hal Bogardus; Michael Bishop

doi:10.1117/12.485229

15 July 2003 Sidewall structure estimation from CD-SEM for lithographic process control

Philip R. Bingham, Jeffery R. Price, Kenneth W. Tobin Jr., Thomas P. Karnowski, Marylyn Hoy Bennett, E. Hal Bogardus, Michael Bishop

Author Affiliations +

Proceedings Volume 5041, Process and Materials Characterization and Diagnostics in IC Manufacturing; (2003) https://doi.org/10.1117/12.485229
Event: Advanced Microelectronic Manufacturing, 2003, Santa Clara, CA, United States

Abstract

In semiconductor device manufacturing, critical dimension (CD) metrology provides a measurement for precise line-width control during the lithographic process. Currently scanning electron microscope (SEM) tools are typically used for this measurement, because the resolution requirements for the CD measurements are outside the range of optical microscopes. While CD has been a good feedback control for the lithographic process, line-widths continue to shrink and a more precise measurement of the printed lines is needed. With decreasing line widths, the entire sidewall structure must be monitored for precise process control. Sidewall structure is typically acquired by performing a destructive cross sectioning of the device, which is then imaged with a SEM tool. Since cross sectioning is destructive and slow, this is an undesirable method for testing product wafers and only a small sampling of the wafers can be tested. We have developed a technique in which historical cross section/top down image pairs are used to predict sidewall shape from top down SEM images. Features extracted from a new top down SEM image are used to locate similar top downs within the historical database and the corresponding cross sections in the database are combined to create a sidewall estimate for the new top down. Testing with field test data has shown the feasibility of this approach and that it will allow CD SEM tools to provide cross section estimates with no change in hardware or complex modeling.

Citation Download Citation

Philip R. Bingham, Jeffery R. Price, Kenneth W. Tobin Jr., Thomas P. Karnowski, Marylyn Hoy Bennett, E. Hal Bogardus, and Michael Bishop "Sidewall structure estimation from CD-SEM for lithographic process control", Proc. SPIE 5041, Process and Materials Characterization and Diagnostics in IC Manufacturing, (15 July 2003); https://doi.org/10.1117/12.485229

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available