Thermal infrared inspection of FRP bridge decks for health monitoring

Marybeth Miceli; John C. Duke; Michael Horne

doi:10.1117/12.499021

1 April 2003 Thermal infrared inspection of FRP bridge decks for health monitoring

Marybeth Miceli, John C. Duke, Michael Horne

Proceedings Volume 5073, Thermosense XXV; (2003) https://doi.org/10.1117/12.499021
Event: AeroSense 2003, 2003, Orlando, Florida, United States

Abstract

Even in the best of economic times, funding for infrastructure maintenance, repair and rehabilitation is never adequate. As infrastructure in the United States continues to age, the funding deficit to simply maintain the existing bridges will continue to soar. Due to the inadequacy of capital allocated for infrastructure repair and rehabilitation, new, more durable construction materials with potentially longer service lives are being explored as a means of narrowing the financial deficit. One such material is fiber reinforced polymer matrix composites (FRP). By replacing conventional bridge component structural materials (i.e.; reinforced concrete and steel) with FRP, which has a higher strength to weight ratio, bridges can achieve a significant reduction in dead load weight. Bridges that have experienced substructure and superstructure deterioration can undergo a superstructure replacement with FRP rather than be subjected to the traditional load posting (vehicular load restrictions). Through reducing the bridge dead load without compromising bridge strength, original design live loads can be maintained. In order for these new bridge superstructure components to be readily accepted as viable construction materials, quick and effective means of monitoring them for degradation and overall structural health must be established and standardized. One of the most promising methods of achieving this is through the use of thermal infrared (TIR). A slight increase in temperature above ambient will allow for adequate inspection of large sections of bridge decking for detection of debonded areas between FRP components. This paper illustrates the successes and challenges of using TIR for this purpose, both in the laboratory and in field investigations. Areas for future work and improvements will be suggested.

Citation Download Citation

Marybeth Miceli, John C. Duke, and Michael Horne "Thermal infrared inspection of FRP bridge decks for health monitoring", Proc. SPIE 5073, Thermosense XXV, (1 April 2003); https://doi.org/10.1117/12.499021

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available