Performance of 320x240 uncooled bolometer-type infrared focal plane arrays

Yutaka Tanaka; Akio Tanaka; Kiyoshi Iida; Tokuhiro Sasaki; Shigeru Tohyama; Akira Ajisawa; Akihiro Kawahara; Seiji Kurashina; Tsutomu Endoh; Katsuya Kawano; Kuniyuki Okuyama; Kazuyuki Egashira; Hideo Aoki; Naoki Oda

doi:10.1117/12.499259

10 October 2003 Performance of 320x240 uncooled bolometer-type infrared focal plane arrays

Yutaka Tanaka, Akio Tanaka, Kiyoshi Iida, Tokuhiro Sasaki, Shigeru Tohyama, Akira Ajisawa, Akihiro Kawahara, Seiji Kurashina, Tsutomu Endoh, Katsuya Kawano, Kuniyuki Okuyama, Kazuyuki Egashira, Hideo Aoki, Naoki Oda

Author Affiliations +

Proceedings Volume 5074, Infrared Technology and Applications XXIX; (2003) https://doi.org/10.1117/12.499259
Event: AeroSense 2003, 2003, Orlando, Florida, United States

Abstract

The performance of a 320 x 240 bolometer-type uncooled infrared (IR) Focal Plane Array (FPA) is described. Vanadium oxide thin film is adopted for the bolometer material, having a sheet resistance of approximately 10 kohms/square. It is patterned such that the bolometer resistance is by a factor of 10 larger than the sheet resistance. On-chip readout integrated circuit (ROIC) is designed to reduce signal drift, extend dynamic range for object temperature and extend ambient temperature range in which operates non-uniformity correction is carried out with about 1/10 fewer frequency than the former ROIC.The 320 x 240 FPA consists of pixels sensitive to IR radiation and optical black (OB) pixels covered with plate which shuts out IR radiation. Drift is reduced by current mirror circuit, using the OB pixels and digital compensation circuit based on voltage change of OB pixels resulting from change in operation temperature. Both the dynamic range and the ambient temperature range are extended by decreasing integration gain and developing low-noise, low-power and large swing operational amplifier(OP-AMP). Since decrease in integration gain degrades noise equivalent temperature difference (NETD), bias voltage for bolometer is increased by factor of 2 and bandwidth is reduced by route half. Finally, IR image was obtained with prototype camera and NETD value was found to be smaller than 0.1K for F/1 optics at 60Hz frame rate and thermal time constant was measured to be 12 msec.

Citation Download Citation

Yutaka Tanaka, Akio Tanaka, Kiyoshi Iida, Tokuhiro Sasaki, Shigeru Tohyama, Akira Ajisawa, Akihiro Kawahara, Seiji Kurashina, Tsutomu Endoh, Katsuya Kawano, Kuniyuki Okuyama, Kazuyuki Egashira, Hideo Aoki, and Naoki Oda "Performance of 320x240 uncooled bolometer-type infrared focal plane arrays", Proc. SPIE 5074, Infrared Technology and Applications XXIX, (10 October 2003); https://doi.org/10.1117/12.499259

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available