Paper
11 September 2003 Comparison of subsampled and fully sampled system MTF curves inferred from the line-spread function using the DIPOL camera
Author Affiliations +
Abstract
The inferred line-spread function is an easy technique for measuring orthogonal components of the two-dimensional modulation transfer function (MTF), even from the air. However, it has been most commonly used for cameras for which the resolution is nowhere near the Nyquist frequency. The purpose of such limitation is so that the pixel sampling does not have a serious consequence on the measurement of the MTF. The binning capability of the purely digital DIPOL camera is used to demonstrate that using this method even in moderately oversampled systems does not impact results as long as certain averaging techniques are used. A brief tutorial of the normalization and pitfalls of the method will also be given so that this powerful and simple measurement will become more widely used. Example images will also be shown of mine simulators, together with polarization-product images.
© (2003) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Harold R. Suiter, Chuong N. Pham, and Rodolpho T. Arrieta "Comparison of subsampled and fully sampled system MTF curves inferred from the line-spread function using the DIPOL camera", Proc. SPIE 5089, Detection and Remediation Technologies for Mines and Minelike Targets VIII, (11 September 2003); https://doi.org/10.1117/12.490005
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Modulation transfer functions

Cameras

Polarization

Spatial frequencies

Imaging systems

Calibration

Modulation

RELATED CONTENT


Back to Top