Paper
10 November 2003 Specific output power scaling of kinetically-enhanced copper vapor lasers
Richard P. Mildren, M. J. Withford, J. A. Piper, G. D. Marshall
Author Affiliations +
Proceedings Volume 5120, XIV International Symposium on Gas Flow, Chemical Lasers, and High-Power Lasers; (2003) https://doi.org/10.1117/12.515483
Event: XIV International Symposium on Gas Flow, Chemical Lasers, and High-Power Lasers, 2002, Wroclow, Poland
Abstract
We have investigated the power scaling behavior of a kinetically enhanced copper vapor laser as a function of the plasma tube thermal insulation. By reducing the insulation to levels much lower than typically used for conventional copper vapor lasers we obtained increases in the specific output power of a small-to-medium scale device (0.8L) up to 130W/litre (i.e., total output power 104W). The laser wall-plug efficiency remains approximately constant (~1.4%) when the supplied power is increased from 5.9kW to 7.4kW. Radially-resolved Cu density measurements show that the depletion of Cu atoms is similar to other devices having much lower specific input power. The results show that kinetic enhancement reduces the depletion of atoms from the axial region by ion-pumping due to reduced fractional ionization and rapid charge recombination during the interpulse period.
© (2003) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Richard P. Mildren, M. J. Withford, J. A. Piper, and G. D. Marshall "Specific output power scaling of kinetically-enhanced copper vapor lasers", Proc. SPIE 5120, XIV International Symposium on Gas Flow, Chemical Lasers, and High-Power Lasers, (10 November 2003); https://doi.org/10.1117/12.515483
Lens.org Logo
CITATIONS
Cited by 2 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Copper

Copper vapor lasers

Plasma

Resonators

Silica

Chemical species

Ceramics

RELATED CONTENT


Back to Top