Paper
28 August 2003 A study of post-exposure baking effect for CAR process in photomask fabrication
Dong-Il Park, Sun-Kyu Seo, Woo-Gun Jeong, Eui-Sang Park, Jong-Hwa Lee, Hyuk-Joo Kwon, Jin-Min Kim, Sung-Mo Jung, Sang-Soo Choi
Author Affiliations +
Abstract
As the requirement of specification on photomask continues to be tightening with advanced logic and memory devices, the combined process of chemically amplified resist (CAR) and high acceleration voltage e-beam writing tool is widely used to meet the resolution and throughput for advance photomask fabrication. It is well known that the post exposure baking (PEB) condition makes serious effect on the characteristic of CAR due to its de-protection reaction with thermal acid catalyzation. In this paper, we present the PEB temperature effect on pattern resolution such as line edge roughness (LER) and proximity effect correction (PEC) latitude that is practical limitation in the combined process of 50 kV writng tool and CAR resist. Our results show that LER and PEC lattitude are strongly dependent on PEB temperature due to resist contrast variation. At higher PEB temperature, increasing the contrast value can reduce the LER and it can increase the optimum PEC latitude.
© (2003) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Dong-Il Park, Sun-Kyu Seo, Woo-Gun Jeong, Eui-Sang Park, Jong-Hwa Lee, Hyuk-Joo Kwon, Jin-Min Kim, Sung-Mo Jung, and Sang-Soo Choi "A study of post-exposure baking effect for CAR process in photomask fabrication", Proc. SPIE 5130, Photomask and Next-Generation Lithography Mask Technology X, (28 August 2003); https://doi.org/10.1117/12.504187
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Line edge roughness

Photomasks

Photoresist processing

Chemically amplified resists

Critical dimension metrology

Lithography

Logic

Back to Top