Paper
12 January 2004 Radiation effects in WFC3 IR detectors
Scott D. Johnson, Augustyn Waczynski, Paul W. Marshall, Elizabeth J. Polidan, Cheryl J. Marshall, Robert A. Reed, Randy A. Kimble, Gregory Delo, David Schlossberg, Anne Marie Russell, Terry Beck, Yiting Wen, John Yagelowich, Robert J. Hill, Edward Wassell, Edward S. Cheng
Author Affiliations +
Abstract
A Hubble Space Telescope (HST) Wide Field Camera 3 (WFC3) flight-like IR detector was tested for radiation hardness by exposing it to high energy protons while operating at the nominal flight temperature of 150 K. The detector is a 1.7 μm cutoff HgCdTe detector with a CdZnTe substrate. The device is hybridized to a silicon multiplexer. The detector response was tested for gradually increasing fluence from less than 1x103 to a total of 5x109 63 MeV protons/cm2. Dark current changes were evaluated after each step. An increase in dark current and new hot pixels were observed after large steps of irradiation. The increased dark current was observed to partially anneal at 190K and fully anneal at room temperature. Radiation effects, hot pixel distribution, and results of annealing at different temperatures are presented here.
© (2004) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Scott D. Johnson, Augustyn Waczynski, Paul W. Marshall, Elizabeth J. Polidan, Cheryl J. Marshall, Robert A. Reed, Randy A. Kimble, Gregory Delo, David Schlossberg, Anne Marie Russell, Terry Beck, Yiting Wen, John Yagelowich, Robert J. Hill, Edward Wassell, and Edward S. Cheng "Radiation effects in WFC3 IR detectors", Proc. SPIE 5167, Focal Plane Arrays for Space Telescopes, (12 January 2004); https://doi.org/10.1117/12.508443
Lens.org Logo
CITATIONS
Cited by 5 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Sensors

Infrared detectors

Radiation effects

Mercury cadmium telluride

Aluminum

Infrared sensors

Charge-coupled devices

Back to Top