Paper
6 February 2004 High-dynamic-range linear analog data links (1-20 GHz) using room temperature DFB laser diodes
Author Affiliations +
Abstract
We report the analysis and application of uncooled, directly-modulated high-speed DFB lasers with emphasis on their analogue transmission performance. Fibre-optic links employing such lasers are shown to meet the most stringent requirements of analogue systems at both high carrier frequencies and high temperatures. Spurious-free dynamic ranges (SFDR) exceeding 100dB×Hz2/3 and 90dB×Hz2/3 and input third-order intercept points (IIP3) above 20dBm and 18dBm are reported for carrier frequencies up to 20GHz at 25°C and up to 10GHz at 85°C, respectively. The error-vector magnitude (EVM) for a 256-QAM modulated signal transmitted over 15km of SMF remains below 1.9% for carrier frequencies of both 2GHz and 5GHz for all measured temperatures. The link performance is assessed by using 3GPP W-CDMA, IEEE 802.11a and IEEE 802.11b signals. In all cases the EVM remains within the standard specification, for fibre-optic link lengths of up to 10km and laser operating temperatures of up to 70°C. Finally, an IEEE 802.11b WLAN demonstrator is presented, allowing antenna remoting over up to 1000m of 62.5/125μm MMF.
© (2004) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Ian H. White, Peter Hartmann, Jonathan D. Ingham, Matthew Webster, David Wake, Adrian Wonfor, Richard V. Penty, Alwyn J. Seeds, and J. Kenton White "High-dynamic-range linear analog data links (1-20 GHz) using room temperature DFB laser diodes", Proc. SPIE 5210, Ultrahigh- and High-Speed Photography, Photonics, and Videography, (6 February 2004); https://doi.org/10.1117/12.516114
Lens.org Logo
CITATIONS
Cited by 5 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Semiconductor lasers

Single mode fibers

Modulation

Temperature metrology

Standards development

Antennas

Signal to noise ratio

Back to Top