Diffractive optical elements: design and fabrication at TASC-INFM

Enzo M. Di Fabrizio; Dan Cojoc; Stefano Cabrini; Luca Businaro; Anna-Maria Gerardino; Filippo Romanato; Matteo Altissimo; Lisa Vaccari

doi:10.1117/12.519891

30 September 2003 Diffractive optical elements: design and fabrication at TASC-INFM

Enzo M. Di Fabrizio, Dan Cojoc, Stefano Cabrini, Luca Businaro, Anna-Maria Gerardino, Filippo Romanato, Matteo Altissimo, Lisa Vaccari

Author Affiliations +

Proceedings Volume 5227, Advanced Topics in Optoelectronics, Microelectronics, and Nanotechnologies; (2003) https://doi.org/10.1117/12.519891
Event: 2003 Chapter books, 2003, Bellingham, WA, United States

Abstract

Diffractive optical elements (DOE’s) can be used to manipulate the amplitude, the phase and the polarization of light beams. They can operate over a wide range of wavelength from UV to x-ray radiation. Interest in DOE’s has grown rapidly in recent years since they are smaller and lower in size and weight than conventional optical elements and in addition allow optical functions impossible to reach with other refractive or reflective optical elements. In this paper we report results obtained in DOE’s design and fabrication at the LILIT Nanolithography beam line developed at the national laboratory TASC-INFM. Among the design methods we have used, the phase retrieval iterative algorithm approach is presented in more detail here. There are also presented aspects involved in the fabrication of high-resolution zone plates for focusing soft x-rays. The fabrication process is based on e-beam lithography and etching techniques similar to those used in the microelectronic technology, allowing structures sized down to few tens of nanometers. Experimental results are presented for some applications of our DOE’s: laser beam shaping, optical tweezers array generation and x-ray microscopy.

Citation Download Citation

Enzo M. Di Fabrizio, Dan Cojoc, Stefano Cabrini, Luca Businaro, Anna-Maria Gerardino, Filippo Romanato, Matteo Altissimo, and Lisa Vaccari "Diffractive optical elements: design and fabrication at TASC-INFM", Proc. SPIE 5227, Advanced Topics in Optoelectronics, Microelectronics, and Nanotechnologies, (30 September 2003); https://doi.org/10.1117/12.519891

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available