You have requested a machine translation of selected content from our databases. This functionality is provided solely for your convenience and is in no way intended to replace human translation. Neither SPIE nor the owners and publishers of the content make, and they explicitly disclaim, any express or implied representations or warranties of any kind, including, without limitation, representations and warranties as to the functionality of the translation feature or the accuracy or completeness of the translations.
Translations are not retained in our system. Your use of this feature and the translations is subject to all use restrictions contained in the Terms and Conditions of Use of the SPIE website.
30 September 2003The determination of the pumping temperature for EDFA
There is presented a simple method to obtain the pumping temperature Tp for EDFA. We propose the analytical method to obtain the pumping temperature for EDFA (Erbium Doped Fiber Amplifier). We have obtained the pumping temperature of EDFA by varying the voltage parameter VTEMP in the following interval VTEMP ε (0 ÷ 2.5). With these sets of values we calculated the pumping temperature Tp of the EDFA as a function of VTEMP.
The alert did not successfully save. Please try again later.
Florentin I. Vasile, Paul Schiopu, "The determination of the pumping temperature for EDFA," Proc. SPIE 5227, Advanced Topics in Optoelectronics, Microelectronics, and Nanotechnologies, (30 September 2003); https://doi.org/10.1117/12.519904